: A non-numeric value encountered in /var/www/trimmcopenhagen.com/public_html/wp-content/themes/depot-child/functions.php
on line 165
||17.72 x 26.77 in
EPS beads – 25% recycled
NOTE: Over time, filling of the product may be compressed during use. Refill with EPS beads may therefore be necessary from time to time. Refill bags are available here: TRIMM EPS beads
- Brush off loose dirt or use a vacuum cleaner
- Hose down fabric thoroughly and prepare a cleaning solution of water and mild detergent (100°F/40°C)
- Use a soft bristle brush to clean. Allow cleaning solution to soak into the fabric.
- Be sure to rinse thoroughly to remove all soap residue.
- Allow Sunbrella to air dry only.
Please see our guide for more cleaning details on www.trimmcopenhagen.com/materialscleaning. Or find detailed cleaning videos here
The Satellite 68 Stool
The Satellite 68 chair is a high-quality outdoor stool with multifunctional properties.
It is suitable in height for an ordinary work table or dining table and is a good alternative to the classic outdoor chair. Due to the lightweight, you can easily move the product around and use them for different purposes depending on the occasion. This makes it particularly suitable for small outdoor dining areas, as it does not take up much space. You sit on the chair like a saddle, which is a different position than you are used to from a dining chair or office chair. At the same time, you have your feet firmly planted on the ground, which makes it easier to straighten your back when sitting at a table.
The chair is also available in a smaller and larger versions.
The Satellite 68 is an outdoor beanbag, which gives a relaxed look that fits well with an outdoor lifestyle. The filling consists of 25% recycled EPS and 75% new high-quality EPS beads. The filling molds to the body, has an insulating effect, and provides good ergonomic support when sitting in the chair. You can open the chair at the bottom and adjust the amount of filling according to your preference.
Satellite 68 is made from the fantastic material Sunbrella Plus®, which is both water-, stain- and mold-resistant thanks to the acrylic coating on the back. At the same time, the fabric is breathable, which prevents moisture and condensation. It also has maximum resistance to mold, as the coating contains a special fungicidal treatment of salt water. Sunbrella Plus is also UV and fade-resistant with a color fastness of 8 out of 10. This means that you can safely leave your outdoor lounge chair outside day and night, regardless of the weather. Watch exciting videos about the material here.
Produced in the EU.